Reward Points ⭐️
Description
Introducing the Walksnail Avatar Lite HD FPV Kit – the ultimate choice for lightweight and high-performance FPV flying. This kit features the new Avatar Lite camera, which boasts an image sensor of 1/2.7″ and a resolution of 1080P/60fps, 720P/120fps, 720P/60fps. The lens is 2.1mm with a FOV of 170° and an aperture of F2.0. The camera’s minimal plastic design and lack of a back plate make it lighter than ever at only 1.8g, while still maintaining its impressive capabilities.
The kit also includes the Avatar Mini 1S VTX, which has a slimmed down design and weighs in at only 8.5g, making it 3.1g lighter than the original 1S VTX. It uses a whip antenna instead of a circular polarised antenna, and has a communication frequency of 5.725-5.850GHz. The transmitter power is FCC:<25.5dBm, CE:<14dBm, SRRC:<20dBm, and MIC:<25dBm. The I/O interface is JST1.06(Power in)JST1.04(USB) and the dimensions are 30306.5mm.
Specification
| Camera | |
| Model | Avatar lite camera |
| Image Sensor | 1/2.7”1nch |
| Resolution | 1080P/60fps,720P/120fps,720P/60fps |
| Ratio | 16/9 4/3 |
| Lens | 2.1mm |
| FOV | 170° |
| Aperture | F2.0 |
| Shutter Rolling | Rolling shutter |
| Min.Illumination | 0.001Lux |
| Weight | 1.8g |
| Dimensions | 14*14*16mm |
| VTX | |
| Model | Avatar mini 1s module |
| Communication Frequency | 5.725-5.850GHz |
| Transmitter Power (EIRP) |
FCC:<25.5dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm |
| I/O Interface | JST1.0*6(Power in)JST0.8*4(USB) |
| Mounting Holes | 25.5*25.5mm |
| Dimensions | 30*30*6.5mm |
| Storage | 8G (V2) / 32G(V3) |
| Recording | 1080p/720p |
| Weight | 6.8g |
| Operating Temperature | -20-40℃ |
| Channels | 8 |
| Wide Power Input | 3.1V-5V(V2) / 3.1-13V(V3) |
| Supported FC System | Betaflight; Inav; Fettec; Kiss; ArduPliot |
| OSD | Canvas mode |
| Bitrate | 25mbps 50mbps |
| Latency | Average delay 22ms |
| Antenna | IPEX |
| 1s lite antenna | |
| Polarization | Linear |
| Frequency range | 5600-5900MHz |
| Gain | 1.6 dbi |
| VSWR | ≤1.5 |
| Input Impedance | 50Ω |
| Interface | IPEX-1 |
| Size | R 5mm,L 70mm |
| Weight | 0.5g |
Includes
X1 Avatar Mini 1S lite KIT
X1 4 Pin USB Cable
X1 4 Pin Power Cable
X4 1.4×8mm Screws
X2 1.4×10mm Screws
X4 M2 Anti-vibration Rubber Dampers *6mm
Product Details
| Product Type | VTX |
| Shipping Weight | 38 grams |
| Vendor | Caddx |
Customer Reviews
Did you know that you could earn 50 reward points for every product review left and an additional 25 points for also adding a photo? Learn more.